[ELECTRON] Bent USB.

[JOHN COUZIN]

Thanks Martin,
                        don't know if I'm up to that but I'll try to give it a go.    John.




________________________________
 From: Martin McGrath <mcgrath.martin at gmail.com>
To: Discussion list for the Electron Club <members at electronclub.org> 
Sent: Sunday, 8 December 2013, 10:08
Subject: Re: [ELECTRON] Bent USB.
 

On 8 December 2013 09:46, JOHN COUZIN <john.c.at95 at btinternet.com> wrote:

> Hi,
>     all you clever geeky guys, I have a wee problem. I have been saving
> lots of important information on to a pen drive, but while it was plugged
> into my device, one of my grandkids accidentally banged against it and
> slightly bent the USB connection. Now it will not register on any of my
> devices and I can't access the information which I need disparately and
> quickly. Any ideas?
>

Don't brute force it back into place, this could damage the
board/connections to the board.

I'm not sure what equipment you have available. Remove the outer casing
(usually plastic)
With a magnifying glass inspect the solder joints between the USB connector
and the wee board. Inspect the board for damage/cracks.

If you notice any damage to the solder joints, clean them up. If not
consider taking some high resolution photos, stick them online somewhere
(flickr?) and post the link here.

Cheers

Martin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.electronclub.org/pipermail/members/attachments/20131208/0cfe7487/attachment.html>
_______________________________________________
Electron Club Members mailing list
members at electronclub.org
http://www.electronclub.org/cgi-bin/mailman/listinfo/members
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.electronclub.org/pipermail/members/attachments/20131208/f6b74bf2/attachment.html>