[ELECTRON] Proposed new club + Arduino meet up
Brian Loudon
brian at loud1design.co.uk
Fri Jan 20 23:13:01 UTC 2012
Hi Rep-rappers,
sorry I haven't responded before, yes I have 8mm smooth rod set aside in
our workshop at work, I just didn't have time to cut the lengths at all
as we had a big deadline today, and then I'm off on holiday for a week.
I'm sure I can get hold of the plate too.
I never hobbed or hobbled or hob-nobbed a bolt before but I can give it
a go in the workshop I'm sure. I'll be back around in a week or so,
cheers,
Brian
On 20/01/2012 18:30, Blair Thompson wrote:
> I think Brian was going to find us some smooth rod from his employer?
>
> Big question then.. Who wants to hob a bolt? :)
>
> I have an extruder built that should take a j-head hot end. It looks
> pretty good.
>
> On 20/01/2012 17:41, Thomas Parry wrote:
>> Yeah, the printer only had a 420mm and a 410mm rod, so I've marked them
>> down for the 2x350mm rods on the BOM but there's also 2x406mm rods
>> needed,
>> so they might be better used for that? I also got a couple of stepper
>> motors out of the printer if we need them for anything in the future
>> although they are quite small and not in the NEMA standard.
>>
>> Tom
>>
>> On Fri, Jan 20, 2012 at 5:35 PM, Kieran Wyse<kieranwyse at gmail.com>
>> wrote:
>>
>>> Ok Ill hold of on buying the belts. Do we need any more smooth rods
>>> and the
>>> plate. Tom I am guessing an old printer didn't provide all that we
>>> need. If
>>> no one has this stuff lying around , I could go to ibrox and pick it
>>> up.
>>> Though can't remember the name of the ironmonger we discussed at the
>>> meeting.
>>>
>>> If some has the rods and plates I'll look at getting an extruder.
>>>
>>> Blair I see to remember you mentioned something about a silicon tube as
>>> well. If my memory is correct. Does anyone know how we might acquire
>>> such a
>>> thing. BandQ?
>>> Kieran
>>>
>>>
>>>
>>>> accuracy in both directions. I'm not sure if they use anti-backlash
>>>> pulleys like the ones that are split in two with slight spring tension
>>>> between them so they grip both faces of the timing belt as it passes
>>>> over their staggered teeth.
>>>>
>>>> On 19 January 2012 21:00, Blair Thompson<mail at justblair.co.uk> wrote:
>>>>> The problem with T5 is that it is designed as a timing cable. This
>>> means
>>>>> that it is effective providing that it only moves in one direction.
>>> On a
>>>>> reprap of course switches direction on either axis constantly. That
>>>> said I
>>>>> am getting really good quality on the T5 belt.
>>>>
>>>>
>>>> --
>>>> Clive Mitchell
>>>>
>>>> _______________________________________________
>>>> members mailing list
>>>> members at electronclub.org
>>>> http://www.electronclub.org/cgi-bin/mailman/listinfo/members
>>>>
>>>> Instructions for changing your mailing list settings:
>>>> http://lists.electronclub.org/emailhowto.html
>>>>
>>>> Archive for this list:
>>>> http://lists.electronclub.org/pipermail/members/
>>>>
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL:<
>>> http://www.electronclub.org/pipermail/members/attachments/20120120/3c89969c/attachment.html
>>>
>>> _______________________________________________
>>> members mailing list
>>> members at electronclub.org
>>> http://www.electronclub.org/cgi-bin/mailman/listinfo/members
>>>
>>> Instructions for changing your mailing list settings:
>>> http://lists.electronclub.org/emailhowto.html
>>>
>>> Archive for this list:
>>> http://lists.electronclub.org/pipermail/members/
>>>
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:<http://www.electronclub.org/pipermail/members/attachments/20120120/7afe5888/attachment.html>
>>
>> _______________________________________________
>> members mailing list
>> members at electronclub.org
>> http://www.electronclub.org/cgi-bin/mailman/listinfo/members
>>
>> Instructions for changing your mailing list settings:
>> http://lists.electronclub.org/emailhowto.html
>>
>> Archive for this list:
>> http://lists.electronclub.org/pipermail/member
>
> _______________________________________________
> members mailing list
> members at electronclub.org
> http://www.electronclub.org/cgi-bin/mailman/listinfo/members
>
> Instructions for changing your mailing list settings:
> http://lists.electronclub.org/emailhowto.html
>
> Archive for this list:
> http://lists.electronclub.org/pipermail/members/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.electronclub.org/pipermail/members/attachments/20120120/238fc1f0/attachment.html>
More information about the members
mailing list