[ELECTRON] Proposed new club + Arduino meet up
Blair Thompson
mail at justblair.co.uk
Sun Oct 30 15:57:47 UTC 2011
The linked section is correct in that this is the correct place to go to for
the standard Prusa. I reckon that most of the parts in this source will be
fine.
That is not to say that this is the only place that parts can be picked
from.
Since you mentioned vertexs, there are some variations available at
thingiverse. Some claim to be easier to print. I would think that as long
as we use parts that are compatible with the original device we won't get
into too much trouble...
Blair
-----Original Message-----
From: members-bounces at electronclub.org
[mailto:members-bounces at electronclub.org] On Behalf Of Kieran Wyse
Sent: 30 October 2011 15:50
To: Discussion list for the Electron Club
Subject: Re: [ELECTRON] Proposed new club + Arduino meet up
Hi Roy,
This is not something that is going to happen in days, aside from everything
else motors are likely to take weeks to arrive ( the supplier I order from
does not have them in stock, took the money though). We are certainly not in
a hurry. The next meeting is not till the 17th of next month. If we a few of
the parts it would be a fantastic.
The parts have been taken from here.
http://www.reprap.org/wiki/Prusa#Printed_Parts
The reprap communicably has given this link when printing on other devices
https://github.com/prusajr/PrusaMendel. (Blair please correct me if I have
totally missed the ball)
I really hope this helps. It is a bit of chicken and egg situation, untll we
have built one we are winging it.
You can if you wish register with goshg.org.uk and edit the post for the
reprap. This goes for anyone.
If this does not help, please let me know and I will ask people far more
knowledgeable than myself.
Let me know how you get on.
Thanks
Kieran.
On 29 October 2011 13:09, Roy Mohan Shearer <fy81le at googlemail.com> wrote:
> Hello,
>
> To be sure, is this the correct folder for me to be printing prusa
> mendel parts for the group build from?
>
> https://reprap.svn.sourceforge.net/svnroot/reprap/trunk/mendel/mechani
> cs/solid-models/cartesian-robot-m4/printed-parts/
>
> Looking at the website I'd say you've put me down for too many prints
> in the first instance, am starting with the vertex pieces but afraid I
> can't say yet when they'll be ready, so I'd recommend finding other
> sources too if you're in any kind of hurry. When do you hope to
> assemble?
>
> cheers!
>
> Roy
>
>
>
> On 28 October 2011 21:43, Kieran Wyse <kieranwyse at gmail.com> wrote:
>
> > Thank you to everyone who attended our meeting.
> >
> > Blair has been making impressive work on the reprap. It is now
> > printing recognisable objects. We made a lot of progress on finding
> > the materials for the community reprap.
> >
> > One thing that I thought after the meeting is would there be
> > interest in collecting some tutorial introduction to the arduino? I
> > am thinking some prints with circuit diagrams and code.
> >
> > Thank
> >
> > Kieran
> >
> > On 23 October 2011 23:21, Blair Thompson <mail at justblair.co.uk> wrote:
> >
> > > Yes, by some black magic that I fail to understand. The voltages
> > involved
> > > are actually higher... 12v. I have actually gone higher, I'm
> > > running
> my
> > > printer at 14v now, that's as high as the power supply I have
> > > goes. I
> > have
> > > a 24v one in the cupboard, I am thinking about going to that voltage.
> > > Still
> > > trying to work out if and what I will damage doing it!!
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: members-bounces at electronclub.org
> > > [mailto:members-bounces at electronclub.org] On Behalf Of Kieran Wyse
> > > Sent: 23 October 2011 23:18
> > > To: Discussion list for the Electron Club
> > > Subject: Re: [ELECTRON] Proposed new club + Arduino meet up
> > >
> > > ok that is what ill get.
> > >
> > > This is probably a dumb question but this ones voltage is 2.8
> > > volts,
> the
> > > arduino is 5 - 9 volts. Do the motor drivers deal with this for us?
> > >
> > >
> > > Kieran.
> > >
> > > On 23 October 2011 23:03, Blair Thompson <mail at justblair.co.uk> wrote:
> > >
> > > >
> http://www.zappautomation.co.uk/product_info.php?cPath=9_43&products_i
> > > > d=29
> > > >
> > > > Look at the holding torque... You want as much as possible in
> > > > the
> nema
> > > > 17 form factor. Its more for the extruder, but better to buy
> > > > all the motors the same. Price wise its not much difference
> > > >
> > > > The link above is what I am using in mine... No probs
> > > >
> > > > Trying to print some parts as we speak. Already made some
> > > > idlers for the X and y axis. I am updating the GOSHG site as I
go...
> > > >
> > > > Blair
> > > >
> > > > -----Original Message-----
> > > > From: members-bounces at electronclub.org
> > > > [mailto:members-bounces at electronclub.org] On Behalf Of Kieran
> > > > Wyse
> > > > Sent: 23 October 2011 22:41
> > > > To: Discussion list for the Electron Club
> > > > Subject: Re: [ELECTRON] Proposed new club + Arduino meet up
> > > >
> > > > Ok, I am defeated.
> > > >
> > > > I have found a few motors,
> > > >
> > > >
> > > > Think this one is not good enough?
> > > >
> > > >
> > > >
> http://www.ebay.co.uk/itm/5-x-NEMA-17-Stepper-Motor-ETS535-0-9-deg-4-2
> > > > V-/180
> > > >
> 740649234?pt=UK_BOI_Electrical_Components_Supplies_ET&hash=item2a14fb7
> > > > 112
> > > >
> > > > I think this one will do, it does seem like over kill.
> > > >
> > > >
> http://www.zappautomation.co.uk/product_info.php?cPath=9_43&products_i
> > > > d=52
> > > >
> > > >
> > > > Or we could get the whole kit.
> > > >
> > > >
> > > >
> https://xyzprinters.com/electronics/136-prusa-all-you-need-electronics
> > > > -kit.h
> > > > tml
> > > >
> > > > seems like a good deal? By the time we have bought all the bits?
> > > >
> > > > What do people think.
> > > >
> > > > p.s. we have another meet up this Thursday.
> > > >
> > > > thanks
> > > >
> > > > kieran
> > > >
> > > >
> > > > On 18 October 2011 19:28, Roy Mohan Shearer
> > > > <fy81le at googlemail.com>
> > > wrote:
> > > >
> > > > > Yeah, you can put me down as providing a couple, will see how
> > > > > rapidly I can do them!
> > > > > Roy
> > > > >
> > > > > On 16 October 2011 19:51, Kieran Wyse <kieranwyse at gmail.com>
> wrote:
> > > > >
> > > > > > Hi Roy,
> > > > > >
> > > > > > That would be great if you could get hold of the parts. I
> > > > > > don't think it matters which printer they are printed on.
> > > > > > I'll put you on the list as provisionally providing the parts if
that is ok.
> > > > > >
> > > > > > Thanks
> > > > > >
> > > > > > Kieran.
> > > > > >
> > > > > >
> > > > > > On 13 October 2011 21:40, Roy Mohan Shearer
> > > > > > <fy81le at googlemail.com>
> > > > > wrote:
> > > > > >
> > > > > >> Great stuff Kieran, looks good! I shall endeavour to make
> > > > > >> it along to either of the coming meetups.
> > > > > >> I could print off a couple via my friend Mike who has a
> > > > > >> Makerbot if that is any help, but don't want to duplicate..
> > > > > >> Does it
> matter
> > > > > >> if parts come
> > > > > from
> > > > > >> different printers do you think?
> > > > > >> Roy
> > > > > >>
> > > > > >>
> > > > > >>
> > > > > >> On 13 October 2011 21:26, Kieran Wyse
> > > > > >> <kieranwyse at gmail.com>
> > wrote:
> > > > > >>
> > > > > >>> Thanks all for coming to the Glasgow Open Source Hardware
> > > > > >>> Group
> > > > > meeting.
> > > > > >>>
> > > > > >>> It was good to see you all.
> > > > > >>>
> > > > > >>> Anyway here is the website http://goshg.org.uk.
> > > > > >>>
> > > > > >>>
> > > > > >>> There is a list of the hardware that we will need under
> > > > > >>> the reprap project
> > > > > >>>
> > > > > >>>
> > > > > >>> Feel free to add and edit and one wanting administrator
> > > > > >>> privileges let me know.
> > > > > >>>
> > > > > >>>
> > > > > >>> I have also add a list of parts for the reprap. If anyone
> > > > > >>> has some things they are willing to give ......
> > > > > >>>
> > > > > >>>
> > > > > >>> Thanks
> > > > > >>>
> > > > > >>> kieran.
> > > > > >>>
> > > > > >>>
> > > > > >>>
> > > > > >>>
> > > > > >>> On 1 October 2011 11:51, Kieran Wyse
> > > > > >>> <kieranwyse at gmail.com>
> > wrote:
> > > > > >>>
> > > > > >>>> Thanks for this , posted a message on the events part of
> > > > > >>>> the arduino forum.
> > > > > >>>>
> > > > > >>>> It sounds like you are making good progress.
> > > > > >>>>
> > > > > >>>> Thanks
> > > > > >>>>
> > > > > >>>> Kieran
> > > > > >>>>
> > > > > >>>>
> > > > > >>>> On 1 October 2011 08:27, Blair Thompson
> > > > > >>>> <mail at justblair.co.uk
> >
> > > > wrote:
> > > > > >>>>
> > > > > >>>>> The official Arduino forum has a couple of places that
> > > > > >>>>> are
> > > > > relevant..*
> > > > > >>>>> ***
> > > > > >>>>>
> > > > > >>>>> ** **
> > > > > >>>>>
> > > > > >>>>>
> > > > > >>>>>
> > > > >
> http://arduino.cc/forum/index.php?PHPSESSID=32bdfb4b9ec69eecf25541f9
> > > > > b8
> > > > > a88f7e&board=27.0
> > > > > >>>>> ****
> > > > > >>>>>
> > > > > >>>>> ** **
> > > > > >>>>>
> > > > > >>>>> for announcing workshops..****
> > > > > >>>>>
> > > > > >>>>> ** **
> > > > > >>>>>
> > > > > >>>>> http://arduino.cc/forum/index.php/board,28.0.html****
> > > > > >>>>>
> > > > > >>>>> ** **
> > > > > >>>>>
> > > > > >>>>> for talking about local groups.****
> > > > > >>>>>
> > > > > >>>>> ** **
> > > > > >>>>>
> > > > > >>>>> Regards ****
> > > > > >>>>>
> > > > > >>>>> ** **
> > > > > >>>>>
> > > > > >>>>> Blair****
> > > > > >>>>>
> > > > > >>>>> ** **
> > > > > >>>>>
> > > > > >>>>> Ps last night I 3D printed my first half decent prints.
> Still
> > > > > >>>>> got
> > > > > some
> > > > > >>>>> fine tuning to do, but getting there.****
> > > > > >>>>>
> > > > > >>>>> ** **
> > > > > >>>>>
> > > > > >>>>> *From:* members-bounces at electronclub.org [mailto:
> > > > > >>>>> members-bounces at electronclub.org] *On Behalf Of *Kieran
> > > > > >>>>> Wyse
> > > > > >>>>> *Sent:* 30 September 2011 23:04
> > > > > >>>>>
> > > > > >>>>> *To:* Discussion list for the Electron Club
> > > > > >>>>> *Subject:* Re: [ELECTRON] Proposed new club + Arduino
> > > > > >>>>> meet
> > > > > >>>>> up****
> > > > > >>>>>
> > > > > >>>>> ** **
> > > > > >>>>>
> > > > > >>>>> Hi Blair,
> > > > > >>>>>
> > > > > >>>>>
> > > > > >>>>> you mention that we could post on an arduino forum. Can
> > > > > >>>>> you remember which one?
> > > > > >>>>>
> > > > > >>>>> Thanks
> > > > > >>>>>
> > > > > >>>>> Kieran.****
> > > > > >>>>>
> > > > > >>>>> On 30 September 2011 19:31, Kieran Wyse <
> kieranwyse at gmail.com>
> > > > > wrote:*
> > > > > >>>>> ***
> > > > > >>>>>
> > > > > >>>>> Hi Blair,
> > > > > >>>>>
> > > > > >>>>> Well done on getting your printer to print.
> > > > > >>>>>
> > > > > >>>>> I unfortunately don't think I'll be able to get to the
> > > > > >>>>> electron club before the next meet up to scavenge. If
> > > > > >>>>> they
> are
> > > > > >>>>> still there by next Thursday then I'll start with a
> > > > > >>>>> screw
> > driver.
> > > > > >>>>>
> > > > > >>>>>
> > > > > >>>>> As to modifying the calendar
> > > > > >>>>>
> > > > > >>>>> The username and password for the electron club calendar
> > > > > >>>>> is
> > > > > >>>>>
> > > > > >>>>> 'electronclub' and the password 'clubcal', and click
> > > > > >>>>> the
> > > 'Login'
> > > > > >>>>> button.
> > > > > >>>>>
> > > > > >>>>> The full how to is
> > > > > >>>>>
> > > > > >>>>> http://www.electronclub.org/doku.php?id=howto:calendar
> > > > > >>>>>
> > > > > >>>>> Hope this helps
> > > > > >>>>>
> > > > > >>>>> Kieran
> > > > > >>>>>
> > > > > >>>>> ****
> > > > > >>>>>
> > > > > >>>>> On 26 September 2011 23:37, Blair Thompson
> > > > > >>>>> <mail at justblair.co.uk>
> > > > > >>>>> wrote:****
> > > > > >>>>>
> > > > > >>>>> Hi Kieran****
> > > > > >>>>>
> > > > > >>>>> ****
> > > > > >>>>>
> > > > > >>>>> In terms of the Meeting dates, my diary is free for now
> > > > > >>>>> FWIW, sounds
> > > > > >>>>> good.****
> > > > > >>>>>
> > > > > >>>>> ****
> > > > > >>>>>
> > > > > >>>>> GOSG sounds fine to me. If the domain is cheap enough
> > > > > >>>>> then
> go
> > > > > >>>>> for
> > > > > it,
> > > > > >>>>> If I can help on the website stuff give me a shout.****
> > > > > >>>>>
> > > > > >>>>> ****
> > > > > >>>>>
> > > > > >>>>> Reprap wise. I am happy to contribute in plastic
> > > > > >>>>> (that's
> > > > > >>>>> thermo-plastic) if I can get coax the current love of my
> > > > > >>>>> life into
> > > > > working.
> > > > > >>>>> Had a slight hot end melty melty problem! Waiting for
parts.
> > > > > >>>>> I did
> > > > > print a
> > > > > >>>>> rather fetching plastic moustache!
> > > > > >>>>>
> > > > > >>>>> For your component list.. I can help with a list of
> > > > > >>>>> receipts to whoever is wishing to do the collating.****
> > > > > >>>>>
> > > > > >>>>> Top tips though.****
> > > > > >>>>>
> > > > > >>>>> Don't let those old PCs get chucked out from the corner
> > > > > >>>>> till you have robbed them of their power supplies. Clip
> > > > > >>>>> off the molex plugs that
> > > > > the
> > > > > >>>>> boards connect to as well. In fact if someone can also
> > > > > >>>>> harvest the
> > > > > power
> > > > > >>>>> connectors on the motherboards as well that will be useful.
> > > > > >>>>> ****
> > > > > >>>>>
> > > > > >>>>> Someone also suggested that they had a modest collection
> > > > > >>>>> of 8mm threaded rod. If we pull together that as well I
> > > > > >>>>> think
> we
> > > > > >>>>> could
> > > > > cobble
> > > > > >>>>> together a lot of the printer without paying out hard
> > > > > >>>>> cash.****
> > > > > >>>>>
> > > > > >>>>> Same could be said for the electronics. I am sure. I
> > > > > >>>>> may have suitable mosfets for heaters etc. Though
> > > > > >>>>> stepper motor drivers may
> > > > > be
> > > > > >>>>> easier to just buy. I do have plenty of .1' female pcb
> > > > > >>>>> connectors
> > > > > and some
> > > > > >>>>> strip board (though printing pcb is within the skill set
> > > > > >>>>> of several
> > > > > of us)
> > > > > >>>>> ****
> > > > > >>>>>
> > > > > >>>>> For a community device I think we should be aiming for
> > > > > >>>>> cheap as we can. Those that want to create their own
> > > > > >>>>> from the
> first
> > > > > >>>>> can then
> > > > > spend as
> > > > > >>>>> little or as much as they feel it is worth to them.****
> > > > > >>>>>
> > > > > >>>>> Good luck on the sponsorship front, but I think if we
> > > > > >>>>> aim to scavenge rather than look for hard cash we can
> > > > > >>>>> keep the costs down. I reckon
> > > > > we will
> > > > > >>>>> probably need to buy the stepper motors unless we get
> > > > > >>>>> really lucky on
> > > > > the
> > > > > >>>>> scavenging front.****
> > > > > >>>>>
> > > > > >>>>> ****
> > > > > >>>>>
> > > > > >>>>> Regards****
> > > > > >>>>>
> > > > > >>>>> ****
> > > > > >>>>>
> > > > > >>>>> Blair****
> > > > > >>>>>
> > > > > >>>>> ****
> > > > > >>>>>
> > > > > >>>>> PS my first attempt at sending this mail hit a moderator
> > > approval.
> > > > > >>>>> Sorry if you all get spammed with a double post****
> > > > > >>>>>
> > > > > >>>>> ** **
> > > > > >>>>>
> > > > > >>>>> _______________________________________________
> > > > > >>>>> members mailing list
> > > > > >>>>> members at electronclub.org
> > > > > >>>>>
> http://lists.electronclub.org/cgi-bin/mailman/listinfo/members
> > > > > >>>>>
> > > > > >>>>> Instructions for changing your mailing list settings:
> > > > > >>>>> http://lists.electronclub.org/emailhowto.html
> > > > > >>>>>
> > > > > >>>>> Archive for this list:
> > > > > >>>>> http://lists.electronclub.org/pipermail/members/****
> > > > > >>>>>
> > > > > >>>>> ** **
> > > > > >>>>>
> > > > > >>>>> ** **
> > > > > >>>>>
> > > > > >>>>> _______________________________________________
> > > > > >>>>> members mailing list
> > > > > >>>>> members at electronclub.org
> > > > > >>>>>
> http://lists.electronclub.org/cgi-bin/mailman/listinfo/members
> > > > > >>>>>
> > > > > >>>>> Instructions for changing your mailing list settings:
> > > > > >>>>> http://lists.electronclub.org/emailhowto.html
> > > > > >>>>>
> > > > > >>>>> Archive for this list:
> > > > > >>>>> http://lists.electronclub.org/pipermail/members/
> > > > > >>>>>
> > > > > >>>>>
> > > > > >>>>
> > > > > >>>
> > > > > >>> _______________________________________________
> > > > > >>> members mailing list
> > > > > >>> members at electronclub.org
> > > > > >>> http://lists.electronclub.org/cgi-bin/mailman/listinfo/mem
> > > > > >>> bers
> > > > > >>>
> > > > > >>> Instructions for changing your mailing list settings:
> > > > > >>> http://lists.electronclub.org/emailhowto.html
> > > > > >>>
> > > > > >>> Archive for this list:
> > > > > >>> http://lists.electronclub.org/pipermail/members/
> > > > > >>>
> > > > > >>>
> > > > > >>
> > > > > >> _______________________________________________
> > > > > >> members mailing list
> > > > > >> members at electronclub.org
> > > > > >> http://lists.electronclub.org/cgi-bin/mailman/listinfo/memb
> > > > > >> ers
> > > > > >>
> > > > > >> Instructions for changing your mailing list settings:
> > > > > >> http://lists.electronclub.org/emailhowto.html
> > > > > >>
> > > > > >> Archive for this list:
> > > > > >> http://lists.electronclub.org/pipermail/members/
> > > > > >>
> > > > > >>
> > > > > >
> > > > > > _______________________________________________
> > > > > > members mailing list
> > > > > > members at electronclub.org
> > > > > > http://lists.electronclub.org/cgi-bin/mailman/listinfo/membe
> > > > > > rs
> > > > > >
> > > > > > Instructions for changing your mailing list settings:
> > > > > > http://lists.electronclub.org/emailhowto.html
> > > > > >
> > > > > > Archive for this list:
> > > > > > http://lists.electronclub.org/pipermail/members/
> > > > > >
> > > > > >
> > > > > -------------- next part -------------- An HTML attachment was
> > > > > scrubbed...
> > > > > URL: <
> > > > >
> http://lists.electronclub.org/pipermail/members/attachments/20111018
> > > > > /b
> > > > > 6a077eb/attachment.htm
> > > > > >
> > > > > _______________________________________________
> > > > > members mailing list
> > > > > members at electronclub.org
> > > > > http://lists.electronclub.org/cgi-bin/mailman/listinfo/members
> > > > >
> > > > > Instructions for changing your mailing list settings:
> > > > > http://lists.electronclub.org/emailhowto.html
> > > > >
> > > > > Archive for this list:
> > > > > http://lists.electronclub.org/pipermail/members/
> > > > >
> > > > -------------- next part -------------- An HTML attachment was
> > > > scrubbed...
> > > > URL:
> > > > <
> > > >
> http://lists.electronclub.org/pipermail/members/attachments/20111023/1
> > > > de28c
> > > > 68/attachment.htm>
> > > > _______________________________________________
> > > > members mailing list
> > > > members at electronclub.org
> > > > http://lists.electronclub.org/cgi-bin/mailman/listinfo/members
> > > >
> > > > Instructions for changing your mailing list settings:
> > > > http://lists.electronclub.org/emailhowto.html
> > > >
> > > > Archive for this list:
> > > > http://lists.electronclub.org/pipermail/members/
> > > >
> > > >
> > > > _______________________________________________
> > > > members mailing list
> > > > members at electronclub.org
> > > > http://lists.electronclub.org/cgi-bin/mailman/listinfo/members
> > > >
> > > > Instructions for changing your mailing list settings:
> > > > http://lists.electronclub.org/emailhowto.html
> > > >
> > > > Archive for this list:
> > > > http://lists.electronclub.org/pipermail/members/
> > > >
> > > -------------- next part -------------- An HTML attachment was
> > > scrubbed...
> > > URL:
> > > <
> > >
> >
> http://lists.electronclub.org/pipermail/members/attachments/20111023/b
> ac89a
> > > c2/attachment.htm>
> > > _______________________________________________
> > > members mailing list
> > > members at electronclub.org
> > > http://lists.electronclub.org/cgi-bin/mailman/listinfo/members
> > >
> > > Instructions for changing your mailing list settings:
> > > http://lists.electronclub.org/emailhowto.html
> > >
> > > Archive for this list:
> > > http://lists.electronclub.org/pipermail/members/
> > >
> > >
> > > _______________________________________________
> > > members mailing list
> > > members at electronclub.org
> > > http://lists.electronclub.org/cgi-bin/mailman/listinfo/members
> > >
> > > Instructions for changing your mailing list settings:
> > > http://lists.electronclub.org/emailhowto.html
> > >
> > > Archive for this list:
> > > http://lists.electronclub.org/pipermail/members/
> > >
> > -------------- next part -------------- An HTML attachment was
> > scrubbed...
> > URL: <
> >
> http://lists.electronclub.org/pipermail/members/attachments/20111028/3
> d2ef7d1/attachment.htm
> > >
> > _______________________________________________
> > members mailing list
> > members at electronclub.org
> > http://lists.electronclub.org/cgi-bin/mailman/listinfo/members
> >
> > Instructions for changing your mailing list settings:
> > http://lists.electronclub.org/emailhowto.html
> >
> > Archive for this list:
> > http://lists.electronclub.org/pipermail/members/
> >
> -------------- next part -------------- An HTML attachment was
> scrubbed...
> URL: <
> http://lists.electronclub.org/pipermail/members/attachments/20111029/0
> ab71985/attachment.htm
> >
> _______________________________________________
> members mailing list
> members at electronclub.org
> http://lists.electronclub.org/cgi-bin/mailman/listinfo/members
>
> Instructions for changing your mailing list settings:
> http://lists.electronclub.org/emailhowto.html
>
> Archive for this list:
> http://lists.electronclub.org/pipermail/members/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.electronclub.org/pipermail/members/attachments/20111030/c5e796
26/attachment.htm>
_______________________________________________
members mailing list
members at electronclub.org
http://lists.electronclub.org/cgi-bin/mailman/listinfo/members
Instructions for changing your mailing list settings:
http://lists.electronclub.org/emailhowto.html
Archive for this list:
http://lists.electronclub.org/pipermail/members/
More information about the members
mailing list