[ELECTRON] Proposed new club + Arduino meet up

Sun Oct 16 18:51:28 UTC 2011

Hi Roy,

That would be great if you could get hold of the parts. I don't think it
matters which printer they are printed on. I'll put you on the list as
provisionally providing the parts if that is ok.

Thanks

Kieran.

On 13 October 2011 21:40, Roy Mohan Shearer <fy81le at googlemail.com> wrote:

> Great stuff Kieran, looks good! I shall endeavour to make it along to
> either of the coming meetups.
> I could print off a couple via my friend Mike who has a Makerbot if that is
> any help, but don't want to duplicate.. Does it matter if parts come from
> different printers do you think?
> Roy
>
>
>
> On 13 October 2011 21:26, Kieran Wyse <kieranwyse at gmail.com> wrote:
>
>> Thanks all for coming to the Glasgow Open Source Hardware Group meeting.
>>
>> It was good to see you all.
>>
>> Anyway here is the website http://goshg.org.uk.
>>
>>
>> There is a list of the hardware that we will need under the reprap project
>>
>>
>>  Feel free to add and edit and one wanting administrator privileges let me
>> know.
>>
>>
>>  I have also add a list of parts for the reprap. If anyone has some things
>> they are willing to give ......
>>
>>
>> Thanks
>>
>> kieran.
>>
>>
>>
>>
>> On 1 October 2011 11:51, Kieran Wyse <kieranwyse at gmail.com> wrote:
>>
>>> Thanks for this , posted a message on the events part of the arduino
>>> forum.
>>>
>>> It sounds like you are making good progress.
>>>
>>> Thanks
>>>
>>> Kieran
>>>
>>>
>>> On 1 October 2011 08:27, Blair Thompson <mail at justblair.co.uk> wrote:
>>>
>>>> The official Arduino forum has a couple of places that are relevant….**
>>>> **
>>>>
>>>> ** **
>>>>
>>>>
>>>> http://arduino.cc/forum/index.php?PHPSESSID=32bdfb4b9ec69eecf25541f9b8a88f7e&board=27.0
>>>> ****
>>>>
>>>> ** **
>>>>
>>>> for announcing workshops..****
>>>>
>>>> ** **
>>>>
>>>> http://arduino.cc/forum/index.php/board,28.0.html****
>>>>
>>>> ** **
>>>>
>>>> for talking about local groups.****
>>>>
>>>> ** **
>>>>
>>>> Regards ****
>>>>
>>>> ** **
>>>>
>>>> Blair****
>>>>
>>>> ** **
>>>>
>>>> Ps last night I 3D printed my first half decent prints.  Still got some
>>>> fine tuning to do, but getting there.****
>>>>
>>>> ** **
>>>>
>>>> *From:* members-bounces at electronclub.org [mailto:
>>>> members-bounces at electronclub.org] *On Behalf Of *Kieran Wyse
>>>> *Sent:* 30 September 2011 23:04
>>>>
>>>> *To:* Discussion list for the Electron Club
>>>> *Subject:* Re: [ELECTRON] Proposed new club + Arduino meet up****
>>>>
>>>> ** **
>>>>
>>>> Hi Blair,
>>>>
>>>>
>>>> you mention that we could post on an arduino forum. Can you remember
>>>> which one?
>>>>
>>>> Thanks
>>>>
>>>> Kieran.****
>>>>
>>>> On 30 September 2011 19:31, Kieran Wyse <kieranwyse at gmail.com> wrote:**
>>>> **
>>>>
>>>> Hi Blair,
>>>>
>>>> Well done on getting your printer to print.
>>>>
>>>> I unfortunately don't think I'll be able to get to the electron club
>>>> before the next meet up to scavenge. If they are still there by next
>>>> Thursday then I'll start with a screw driver.
>>>>
>>>>
>>>> As to modifying the calendar
>>>>
>>>> The username and password for the electron club calendar is
>>>>
>>>>   'electronclub' and the password 'clubcal', and click the 'Login'
>>>> button.
>>>>
>>>> The full how to is
>>>>
>>>> http://www.electronclub.org/doku.php?id=howto:calendar
>>>>
>>>> Hope this helps
>>>>
>>>> Kieran
>>>>
>>>> ****
>>>>
>>>> On 26 September 2011 23:37, Blair Thompson <mail at justblair.co.uk>
>>>> wrote:****
>>>>
>>>> Hi Kieran****
>>>>
>>>>  ****
>>>>
>>>> In terms of the Meeting dates, my diary is free for now FWIW, sounds
>>>> good.****
>>>>
>>>>  ****
>>>>
>>>> GOSG sounds fine to me.  If the domain is cheap enough then go for it,
>>>> If I can help on the website stuff give me a shout.****
>>>>
>>>>  ****
>>>>
>>>> Reprap wise.  I am happy to contribute in plastic (that’s
>>>> thermo-plastic) if I can get coax the current love of my life into working.
>>>> Had a slight hot end melty melty problem!  Waiting for parts.  I did print a
>>>> rather fetching plastic moustache!
>>>>
>>>> For your component list..  I can help with a list of receipts to whoever
>>>> is wishing to do the collating…****
>>>>
>>>> Top tips though…****
>>>>
>>>> Don’t let those old PCs get chucked out from the corner till you have
>>>> robbed them of their power supplies.  Clip off the molex plugs that the
>>>> boards connect to as well.  In fact if someone can also harvest the power
>>>> connectors on the motherboards as well that will be useful.  ****
>>>>
>>>> Someone also suggested that they had a modest collection of 8mm threaded
>>>> rod.  If we pull together that as well I think we could cobble together a
>>>> lot of the printer without paying out hard cash.****
>>>>
>>>> Same could be said for the electronics.  I am sure.  I may have suitable
>>>> mosfets for heaters etc.  Though stepper motor drivers may be easier to just
>>>> buy.  I do have plenty of .1’ female pcb connectors and some strip board
>>>> (though printing pcb is within the skill set of several of us)****
>>>>
>>>> For a community device I think we should be aiming for cheap as we can.
>>>> Those that want to create their own from the first can then spend as little
>>>> or as much as they feel it is worth to them.****
>>>>
>>>> Good luck on the sponsorship front, but I think if we aim to scavenge
>>>> rather than look for hard cash we can keep the costs down.  I reckon we will
>>>> probably need to buy the stepper motors unless we get really lucky on the
>>>> scavenging front.****
>>>>
>>>>  ****
>>>>
>>>> Regards****
>>>>
>>>>  ****
>>>>
>>>> Blair****
>>>>
>>>>  ****
>>>>
>>>> PS my first attempt at sending this mail hit a moderator approval.
>>>> Sorry if you all get spammed with a double post****
>>>>
>>>> ** **
>>>>
>>>> _______________________________________________
>>>> members mailing list
>>>> members at electronclub.org
>>>> http://lists.electronclub.org/cgi-bin/mailman/listinfo/members
>>>>
>>>> Instructions for changing your mailing list settings:
>>>> http://lists.electronclub.org/emailhowto.html
>>>>
>>>> Archive for this list:
>>>> http://lists.electronclub.org/pipermail/members/****
>>>>
>>>> ** **
>>>>
>>>> ** **
>>>>
>>>> _______________________________________________
>>>> members mailing list
>>>> members at electronclub.org
>>>> http://lists.electronclub.org/cgi-bin/mailman/listinfo/members
>>>>
>>>> Instructions for changing your mailing list settings:
>>>> http://lists.electronclub.org/emailhowto.html
>>>>
>>>> Archive for this list:
>>>> http://lists.electronclub.org/pipermail/members/
>>>>
>>>>
>>>
>>
>> _______________________________________________
>> members mailing list
>> members at electronclub.org
>> http://lists.electronclub.org/cgi-bin/mailman/listinfo/members
>>
>> Instructions for changing your mailing list settings:
>> http://lists.electronclub.org/emailhowto.html
>>
>> Archive for this list:
>> http://lists.electronclub.org/pipermail/members/
>>
>>
>
> _______________________________________________
> members mailing list
> members at electronclub.org
> http://lists.electronclub.org/cgi-bin/mailman/listinfo/members
>
> Instructions for changing your mailing list settings:
> http://lists.electronclub.org/emailhowto.html
>
> Archive for this list:
> http://lists.electronclub.org/pipermail/members/
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.electronclub.org/pipermail/members/attachments/20111016/662459dc/attachment-0001.htm>